MACHINERY GROUP LTD
1 HP 16''x32'' Multi-Function Metal Lathe Milling Machine Head for Metalworking – Lathe, Drilling, and Milling Operations with Powerful Motor,...

1 HP 16''x32'' Multi-Function Metal Lathe Milling Machine Head for Metalworking – Lathe, Drilling, and Milling Operations with Powerful Motor,...

Lathes & Mill Drill Combination

£2,013.12

Indicative price — contact our team to confirm and quote

  • No obligation
  • Fast response
  • Expert advice

110 V equipment — check your supply

This unit is specified at 110 V, against UK mains of 230 V. 110 V is common on UK sites as a centre-tapped transformer supply, so this may well suit site use — but UK site supply runs at 50 Hz, and this equipment is US-specified. Confirm your transformer and intended use with us before ordering.

Supplied to trade buyers only. Because this item is not UK supply specification, we supply it to businesses specifying it for a known application rather than to consumers. Tell us the installation and we will confirm what you need before you order.

Quantity
UK BasedExpert AdviceFree QuoteTechnical Support
Share: Email

Lathe
Motor Power (Lathe)
1PH(750W), Single-Phase, 110V, 60HZ
Swing Over Bed
16-8/15”(420mm)
Swing Over Cross Slide
11-1/2″(120mm)
Distance Between Centers
31-1/2”(800mm)
Bed Width
5-5/16”(135mm)
Spindle Bore
1-1/10”(28mm)
Spindle Mount
Flange mount
Spindle Type
Integrated Spindle
DIA of the chuck
5”(125mm)
Spindle Taper
MT4
Tailstock Taper
MT3
Tailstock Quill Travel
2-3/4”(70mm)
Carriage Travel
29-1/8”(740mm)
Carriage Leadscrew Diameter
25/32″(20mm)
Cross Slide Travel
7-7/8”(200mm)
Compound Slide Travel
3”(76.2mm)
Spindle Speed Range
160-1360RPM
Number of Speed Ranges
7
Longitudinal Feed Rate
0.002”-0.014”
Transverse Feed Rate
0.002”-0.014”
Leadscrew Size & Pitch
20mm 6TPI
Threading Capacity – Inch
4-120TPI
Threading Capacity – Metric
0.2-6mm
Thread Dial Indicator
YES
Maximum Tool Bit Size
1/2”x1/2”(12x12mm)
Drill/Mill
Motor Power (Mill Head)
1PH(750W)
Mill Taper
MT3
Spindle Speed Range
120, 200, 310, 350, 400, 450, 530, 600, 660, 900, 1380, 1450, 1670, 2140, 2350, 3000 RPM
Number of Speed Steps
16
Spindle Travel 
4-5/16″(110mm)
Drawbar Thread Size
3/8”(9.52mm)
Drawbar Length
13”(330mm)
Drawbar Thread Pitch
16TPI
Drill Capacity
7/8”(22mm)
End Milling Capacity
1-1/8″(28mm)
Face Milling Capacity
3-5/32”(80mm)
Vertical Travel (Z-Axis)
/
Distance: Spindle to Table
14-1/2”(370mm)
Distance: Spindle to Center Line
6-1/8”(156mm)
Headstock Height
3-1/8”(79.4mm)
Head Tilt Angle
0°
Swivel angle of the headstock
360°
Drive Type
Belt-driven AC Motor
Overall Dimensions
57”x23”x45”(1440x580x1140mm)
N.W/G.W
595/653lbs(270/296kg)

Specifications are provided for comparison only and may be based on engineering calculations rather than physical measurements. They are subject to change without notice and vary with design, manufacturing and operating conditions. Confirm exact specifications with us before ordering.