MACHINERY GROUP LTD
150 Ton H-Frame Electric Hydraulic Shop Press with Double-Acting Cylinder & Chain-Driven Table Lift, 110V Motor, Fully Welded Steel Frame, Safety...

150 Ton H-Frame Electric Hydraulic Shop Press with Double-Acting Cylinder & Chain-Driven Table Lift, 110V Motor, Fully Welded Steel Frame, Safety...

Shop Press

£8,191.91

Indicative price — contact our team to confirm and quote

  • No obligation
  • Fast response
  • Expert advice

110 V equipment — check your supply

This unit is specified at 110 V, against UK mains of 230 V. 110 V is common on UK sites as a centre-tapped transformer supply, so this may well suit site use — but UK site supply runs at 50 Hz, and this equipment is US-specified. Confirm your transformer and intended use with us before ordering.

Supplied to trade buyers only. Because this item is not UK supply specification, we supply it to businesses specifying it for a known application rather than to consumers. Tell us the installation and we will confirm what you need before you order.

Quantity
UK BasedExpert AdviceFree QuoteTechnical Support
Share: Email

Rated Capacity
150 Tons
Pump Type
Single-acting
Operation Type
Electric Hydraulic Operation
Voltage
110V / 60Hz
Ram Stroke
13.8 in
Power
2 HP（1.5 kW）
Ram Diameter
3.4 in
Revolutions Per Minute
1800 RPM
Cylinder Bore
8.7 in
Working Pressure – Low Pressure Stage
725 PSI
Ram Range of Movement
11.8 Left / Right from Center
Working Pressure – High Pressure Stage
5582.5 PSI
Bed Depth
13 in
Flow Rate – Low Pressure Stage
2.9 GPM
Bed Height
15 in
Flow Rate – High Pressure Stage
0.48 GPM
Minimum Ram to Bed
18 in
Usable Oil Capacity
7.9 US Gallons
Maximum Ram to Bed
38 in
Oil Tank Capacity
10 US Gallons
Number of Bed Adjustment Holes
5
Recommended Hydraulic Oil
AW32 Hydraulic Oil
Bed Adjustment Hole Spacing
7.5 in
Pump Size
28.3 x 18.8 x 13.8 in
Frame Construction
Fully Welded Heavy-Duty H-Frame
Gauge Type
4 in Oil-Filled Pressure Gauge
Assembled Size (H x D x W)
87 x 41.4 x 71.7 in
Included Accessories
Protective Grid Guard, V-Blocks
Internal Frame Width
45.3 in
Packing Size (LxWxH)
89.0 x 60.6 x 31.5 in
Protective Grid Guard Size
39 x 24 in
Weight (N.W/G.W.)
2264.1 lbs / 2623.5 lbs
Ram Retraction
Twin Springs

Specifications are provided for comparison only and may be based on engineering calculations rather than physical measurements. They are subject to change without notice and vary with design, manufacturing and operating conditions. Confirm exact specifications with us before ordering.