MACHINERY GROUP LTD
100 Ton H-Frame Electric Hydraulic Shop Press with Hand Winch, 110V Motor, Fully Welded Steel Frame, Safety Guard, Foot Pedal Control, HSP100E

100 Ton H-Frame Electric Hydraulic Shop Press with Hand Winch, 110V Motor, Fully Welded Steel Frame, Safety Guard, Foot Pedal Control, HSP100E

Shop Press

£4,393.50

Indicative price — contact our team to confirm and quote

  • No obligation
  • Fast response
  • Expert advice

110 V equipment — check your supply

This unit is specified at 110 V, against UK mains of 230 V. 110 V is common on UK sites as a centre-tapped transformer supply, so this may well suit site use — but UK site supply runs at 50 Hz, and this equipment is US-specified. Confirm your transformer and intended use with us before ordering.

Supplied to trade buyers only. Because this item is not UK supply specification, we supply it to businesses specifying it for a known application rather than to consumers. Tell us the installation and we will confirm what you need before you order.

Quantity
UK BasedExpert AdviceFree QuoteTechnical Support
Share: Email

Rated Capacity
100 Tons
Pump Type
Single-acting
Operation Type
Electric Hydraulic Operation
Voltage
110V / 60Hz
Ram Stroke
11.8 in
Power
2 HP（1.5 kW）
Ram Diameter
3.4 in
Revolutions Per Minute
1800 RPM
Cylinder Bore
5.5 in
Working Pressure – Low Pressure Stage
725 PSI
Ram Range of Movement
4.5 in Left / Right from Center
Working Pressure – High Pressure Stage
9135 PSI
Bed Depth
8 in
Flow Rate – Low Pressure Stage
1.74 GPM
Bed Height
11.8 in
Flow Rate – High Pressure Stage
0.48 GPM
Minimum Ram to Bed
3.5 in
Usable Oil Capacity
7.9 US Gallons
Maximum Ram to Bed
33.1 in
Oil Tank Capacity
10 US Gallons
Number of Bed Adjustment Holes
7
Recommended Hydraulic Oil
AW32 Hydraulic Oil
Bed Adjustment Hole Spacing
5.9 in
Pump Size
25.5 x 16 x 12 in
Frame Construction
Fully Welded Heavy-Duty H-Frame
Gauge Type
4 in Oil-Filled Pressure Gauge
Assembled Size (H x D x W)
78.6 x 64.3 x 28.7 in
Included Accessories
Protective Grid Guard, Hand Winch, V-Blocks
Internal Frame Width
30.9 in
Packing Size (LxWxH)
81.1 x 44.5 x 17.3 in
Protective Grid Guard Size
27 x 24 in
Weight (N.W/G.W.)
1278.7 lbs / 1391.1 lbs
Ram Retraction
Twin Springs

Specifications are provided for comparison only and may be based on engineering calculations rather than physical measurements. They are subject to change without notice and vary with design, manufacturing and operating conditions. Confirm exact specifications with us before ordering.