MACHINERY GROUP LTD
1.5 HP 10'' x 30'' Combination Lathe Milling Drilling Machine, 1.5'' Spindle Bore, 0-2000 RPM Variable Speed, High Precision Benchtop Lathe for...

1.5 HP 10'' x 30'' Combination Lathe Milling Drilling Machine, 1.5'' Spindle Bore, 0-2000 RPM Variable Speed, High Precision Benchtop Lathe for...

Lathes & Mill Drill Combination

£3,127.36

Indicative price — contact our team to confirm and quote

  • No obligation
  • Fast response
  • Expert advice

110 V equipment — check your supply

This unit is specified at 110 V, against UK mains of 230 V. 110 V is common on UK sites as a centre-tapped transformer supply, so this may well suit site use — but UK site supply runs at 50 Hz, and this equipment is US-specified. Confirm your transformer and intended use with us before ordering.

Supplied to trade buyers only. Because this item is not UK supply specification, we supply it to businesses specifying it for a known application rather than to consumers. Tell us the installation and we will confirm what you need before you order.

Quantity
UK BasedExpert AdviceFree QuoteTechnical Support
Share: Email

Lathe Parameter
Motor Power (Lathe)
1.5 HP, 110V, single-phase, 10A
Swing Over Bed
9-7/8″ (250 mm)
Swing Over Cross Slide
5-1/2″ (140 mm)
Swing Over Saddle
5″ (127 mm)
Distance Between Centers
29-1/2″ (750 mm)
Bed Width
5-3/8″ (135mm)
Spindle Bore
1-1/2″ (38 mm)
Spindle Mount
Intrinsic back plate
Spindle Taper
MT#5
Tailstock Taper
MT#2
Tailstock Quill Travel
3″ (75 mm)
Tailstock Offset
Carriage Travel
27-1/2″ (700 mm)
Cross Slide Travel
5″ (127 mm)
Compound Slide Travel
3″ (75 mm)
Spindle Speed Range
0–2000 RPM
Number of Speed Ranges
Variable
Longitudinal Feed Rate
0.0025 – 0.014 in./rev.
Transverse Feed Rate
0.0014 – 0.004 in./rev.
Leadscrew Size & Pitch
20mm(8TPI)
Threading Capacity – Inch
8–80 TPI(37KINDS)
Threading Capacity – Metric
0.35 – 3.0 mm(21kinds)
Thread Dial Indicator
YES
Tool Post Type
4-way
Max Tool Bit Size
15/32”(12mm)
Mill/Drill Head Specifications
Motor Power (Mill Head)
1HP(750W)
Spindle Taper
R8
Spindle Speed Range
0-2500RPM
Spindle Travel (Quill Stroke)
2″(50mm)
Quill Diameter
Ø60 mm
Drawbar Thread Size
7/16″-20
Drilling Capacity
5/8″(16mm)
End Milling Capacity
1/2″(12mm)
Face Milling Capacity
2″(50mm)
Vertical Travel (Z-Axis)
10-7/8″(275mm)
Head Tilt Angle
±90°
Distance: Spindle to Table
10-7/8″(275mm)
Distance: Spindle to Column
6-5/8″(170mm)
Column Type
Dovetail Slot
Drive Type
Belt Drive Brushless
Machine Dimensions & Utilities
Electrical Requirements
110V 1PHASE
Overall Dimensions
52”x26”x38-1/4”(1320x660x970mm)
Net / Gross Weight
440/517lbs(200/235kg)
Shipping Dimensions
56”x27”x39”（1420x680x970mm）

Specifications are provided for comparison only and may be based on engineering calculations rather than physical measurements. They are subject to change without notice and vary with design, manufacturing and operating conditions. Confirm exact specifications with us before ordering.