Skid Steer 3 Point Hitch PTO Adapter, 16-20 GPM

A skid steer to three-point hitch PTO adapter, allowing tractor implements to be run from a skid steer. Lower link inner dimension 28 in, output 30–75 HP equivalent, flow 15.8–19.8 gal/min, 2500–2900 psi, shaft speed 520–750 rpm.

This is a genuinely useful bridge if you own tractor implements but your working machine is a skid steer — flail mowers, finishing mowers, post drivers and similar become usable without a second machine.

Note the shaft speed range of 520–750 rpm. Implements built for 540 rpm PTO sit within that, but the speed varies with hydraulic flow, so an implement sensitive to exact PTO speed needs checking.

The 28 in lower link dimension corresponds to Category 1 implements. Confirm your implements match before ordering.

Check your machine's hydraulic flow and working pressure against the figures above before ordering. An attachment run outside its flow range either will not operate or performs poorly and wears quickly. Tell us your host machine and we will confirm compatibility. Price excludes VAT and delivery.