60" Standard 3Point Offset Flail Ditch Bank Mower, 25-60HP, VAM60
Standard Ditch Bank Flail Mowers£2,003.83
Indicative price — contact our team to confirm and quote
- No obligation
- Fast response
- Expert advice
Engine Power Required
25-60 hp
Rotor Shaft Speed
2356 rpm
Working Width
60in
Hydraulic Fittings Size
G1/2 in
Overall Width
64in
Hydraulic Hoses Quantity
4
Ground Clearance (Two Gears)
0.5-0.6in
Drive Type
Belt Drive
Max. Cutting Diameter
Depends On The Type Of Grass
Spline End
1.375in Z6
Offset Distance from The Center (Maximum)
77in
Driveline Shaft Length
T6-LF-63 With Shear Bolt ; 63in-77in [05B-1600]
Tilt-Up Angle
90°
PTO Shaft Speed
540 rpm
Tilt-Down Angle
60°
3-Point Hitch
CAT 1
Number Of Blades
24
Deck Thickness
0.16in
Blade Type
Hammer
Side Plate Thickness
0.25in
Size of Blades
3.5 x 3.2 x 1.6in
Number of Belts
3
Blade Weight
0.9 lbs
Belt Size
V Belt 17×991
Blade （Tines）Material
Cast Steel
Gearbox 0il Type
85W-90
Rotor Bearing
SKF Bearing
Dimensions (L x W x H)
64 x 27.5 x 28in
Rotor Diameter
4.3in
Finsh
Powder Coating
Blade Swing Diameter
14in
Warranty
1 Year
Rotor Thickness
0.3in
Weight (N.W./G.W.)
657/772 lbs
Specifications are provided for comparison only and may be based on engineering calculations rather than physical measurements. They are subject to change without notice and vary with design, manufacturing and operating conditions. Confirm exact specifications with us before ordering.
| Finish | Powder Coating |
|---|---|
| Belt Size | V Belt 17×991 |
| Blade Type | Hammer |
| Drive Type | Belt Drive |
| Spline End | 1.375in Z6(34.9 mm Z6) |
| Blade Weight | 0.9 lbs(0.408 kg) |
| Overall Width | 64in(1.63 m) |
| Rotor Bearing | SKF Bearing |
| Tilt-Up Angle | 90° |
| Working Width | 60in(1.52 m) |
| Deck Thickness | 0.16in(4.06 mm) |
| Rotor Diameter | 4.3in(109 mm) |
| Size of Blades | 3.5 x 3.2 x 1.6in(88.9 × 81.3 × 40.6 mm) |
| Number of Belts | 3 |
| PTO Shaft Speed | 540 rpm |
| Rotor Thickness | 0.3in(7.62 mm) |
| Tilt-Down Angle | 60° |
| Gearbox 0il Type | 85W-90 |
| Number Of Blades | 24 |
| Rotor Shaft Speed | 2356 rpm |
| Blade Swing Diameter | 14in(356 mm) |
| Side Plate Thickness | 0.25in(6.35 mm) |
| Weight (net / gross) | 657/772 lbs(298 / 350 kg) |
| Engine Power Required | 25-60 hp(18.6 – 44.7 kW) |
| Max. Cutting Diameter | Depends On The Type Of Grass |
| Dimensions (L x W x H) | 64 x 27.5 x 28in(1,626 × 699 × 711 mm) |
| Driveline Shaft Length | T6-LF-63 With Shear Bolt ; 63in-77in [05B-1600](T6-LF-63 With Shear Bolt ; 1.6 m-77in [05B-1600]) |
| Hydraulic Fittings Size | G1/2 in |
| Hydraulic Hoses Quantity | 4 |
| Blade （Tines）Material | Cast Steel |
| Ground Clearance (Two Gears) | 0.5-0.6in(12.7 – 15.2 mm) |
| Offset Distance from The Center (Maximum) | 77in(1.96 m) |
Figures in brackets are metric conversions of the manufacturer’s stated imperial values, given for comparison. Where a tolerance matters, work from the original figure and confirm it with us.
Enquire about this product
Standard Ditch Bank Flail Mowers
65" Standard 3 Point Offset Flail Ditch Bank Mower, 30-60HP, VAM65
£2,233.62ex VAT
Request a quote for volume pricing
Standard Ditch Bank Flail Mowers
60" Standard 3Point Offset Flail Ditch Bank Mower, 25-60HP, VAM60
£2,004.50ex VAT
Request a quote for volume pricing
Standard Ditch Bank Flail Mowers
48" Standard 3 Point Offset Flail Ditch Bank Mower, 25-50HP, VAM48
£1,861.22ex VAT
Request a quote for volume pricing
Standard Ditch Bank Flail Mowers
48" Standard 3 Point Offset Flail Ditch Bank Mower, 25-50HP, VAM48
£1,855.35ex VAT
Request a quote for volume pricing